lifting webbing
"
12mm de Mechanische Verbonden van de de Slingerassemblage van de Draadkabel Kern van de het Oogvezel Zachte
Soft Eye Mechanical Spliced Wire Rope Sling (Fibre Core) Product Description These slings have both ends that have been folded back on itself, mechanically pressed and secured with a ferrule. This creates an eye-shaped loop, which can be utilized for a range of applications. This soft loop has been left natural. A ‘hard-eye’ would be a loop that’s supported along the inside of the loop using a metal thimble. A wire rope sling that has soft eyes at each end will be less
De Hand van de vezelkern verbond van de de Slingerassemblage van de Draadkabel Gegalvaniseerd het Staalmateriaal
Hand Spliced Wire Rope Sling (Fibre Core) Product Description A Hand Spliced Wire Rope Sling is constructed when the end of a single-part wire rope is bent back along the rope to create a looped eye shape, and strands at the end of this eye are then tucked back inside the body of the rope by hand. The eye shape helps to create a sling that can be used for a variety of applications. Hand-spliced ropes can be complete without the need for a thimble, while they often being
de 50mm Gegalvaniseerde Assemblage van de Staalkabelslinger met Open Spelter-Contactdoos
Spelter Socket (Open Type) Description 1. Reference standard: EN 13411-4: 2002 2. Safety Factor: 5:1. 3. The above metioned wire ropes feature 6 x 19 + IWRC, 6 x 37(a) + IWRC, 6 x 61 (a) + IWRC and 8 x 61 (a) + IWRC construction, with 1770 MPa in tensile strength. 4. The wire rope structure, tensile strength and working load limit could be customized upon request. Our Open Spelter Socket is also named as poured socket, equipped with cotter pin. Product Code Diameter(mm) WLL(T
De ENGELSE 13411-4 Gesloten Assemblage van de de Kabelslinger van de Typedraad met Spelter-Contactdoos
Spelter Socket (Closed Type) Main features: 1. Reference standard: EN 13411-4: 2002 2. Safety Factor: 5:1. 3. The above metioned wire ropes feature6 x 19 + IWRC, 6 x 37 (a) + IWRC, 6 x 61 (a) + IWRC and 8 x 61 (a) + IWRC construction, with 1770 MPa in tensile strength. 4. The wire rope structure, tensile strength and working load limit could be customized upon request. Closed pelter socket also named as poured socket, with a hole that is made for a pin or bolt. They are made
Het Type van ASME B30.9 de Open Contactdoos van Swage voor de Slinger van de Draadkabel
Swage Socket Swage sockets are used with a swaging machine to terminate wire ropes. This type of socket is more resistant to wire fatigue at the point of connection between the socket and cable, but it does not always have as much break strength efficiency as a spelter socket. The swage socket is attached to the end of a wire rope sling by using a hydraulic machine and special dies. Our Open Swage Sockets and Closed Swage Sockets are forged from high tensile steel, while
Gegalvaniseerde Koolstofstaal Open Type Contactdoos 1/2 van Swage“ Diameter
Swage Socket Swage sockets are used with a swaging machine to terminate wire ropes. This type of socket is more resistant to wire fatigue at the point of connection between the socket and cable, but it does not always have as much break strength efficiency as a spelter socket. The swage socket is attached to the end of a wire rope sling by using a hydraulic machine and special dies. Our Open Swage Sockets and Closed Swage Sockets are forged from high tensile steel, while
De Boogsluiting van het staal ZAL de Brede Lichaam met de Speld van de Veiligheidsschroef 1,25 Duim 12 Ton
Tandard Bow Shackle with Safety Screw Pin Product Description The shackles have a large rounded shape that allows them to take loads from many directions without developing significant side load. - All screw pin shackles are quenched and tempered, with high quality carbon steel shackle bows and alloy steel pins. - Shackles bows are all hot dip galvanized, screws pins are painted yellow or customized upon request. - Meets or exceeds all requirements of ASME B30.26-2004 and RR
Het Staalschroef Pin Bow Shackle Wide Body van ASME B30.26 12 Ton
Standard Dee Shackle with Safety Screw Pin Product Description Dee Shackles, also referred to as Chain Shackles, which have a Dshaped bow that is narrower than Anchor / Bow Shackles. They are designed and rated for in-line tension, they should not be side loaded,as side loading can twist or bend the bow of the shackle. When using a chain shackle, the center line of the load should always coincide with the center line of the shackle when in use. - All screw pin shackles are
12 van het de Veiligheids de Brede Lichaam van het tonstaal Sluitingen Hete Onderdompeling Gegalvaniseerd Pin Bow Shackle
Standard Dee Shackle with Safety Bolt Product Description A bolt type Dee Shackle is a more secure version used in rigging that features the combination of a bolt and nut located alongside a cotter pin,offering a double safety which prevents accidental unscrewing of the pin. • All our shackles are quenched and tempered, with high quality carbon steel shackle bows and alloy steel pins. • Shackles bows are all hot dip galvanized, pins are painted yellow or customized upon
