De Slingerassemblage van de draadkabel

12 tonne DNV 2.7-1 Offshore Container Lifting Sling, four-leg swaged wire rope sling, sling assembly, lifting set DNV 2.7-1 Offshore Container Lifting Sling Set When DNV revised the DNV 2.7-1 Certification Note, the most extensive changes were made in the lifting sling requirements. The sling is a four or five legged wire rope lifting sling fitted with a quad assembly and shackles. Each component of the lifting sling is specified to the capacity of the container. The sling is

96mm Cable Laid Grommet, general usage, fibre core, large diameter, multi-wire strands sling, for Heavy Duty Application Grommet / Endless Cable Laid Wire Rope Sling, fibre core Product Description Our general usage Cable Laid Grommet is an endless wire rope lifting sling made from one continuous length of steel wire rope, formed to make a body composed of 6 outer ropes around a core rope, featuring 6 x 37 (b) + FC construction, with 1670 MPa in tension strength. The rope

20 tonne DNV 2.7-1 Offshore Container Lifting Sling, four-leg swaged wire rope sling, sling assembly, lifting set DNV 2.7-1 Offshore Container Lifting Sling Set All of our DNV 2.7-1 Offshore Container Lifting Slings are produced according to our DNV Quality management approved system. When DNV revised the DNV 2.7-1 Certification Note, the most extensive changes were made in the lifting sling requirements. The sling is a four or five legged wire rope lifting sling fitted with

8 tonne DNV 2.7-1 Offshore Container Lifting Sling, four-leg swaged wire rope sling, sling assembly, lifting set DNV 2.7-1 Offshore Container Lifting Sling Set Offshore Container are mainly used on offshore oil platforms. They are much different with normal ISO container. Not only because strict safety requirements have to be met, but also because they are mainly transported by small ship and lifted / unloaded by crane. When DNV revised the DNV 2.7-1 Certification Note, the

9/16" Wire Rope Sling with Standard Thimble Eye, Eye Sling, greater protection against wear and deformation of the wire rope eye Wire Rope Sling and Wire Rope attachment Product Description Our Standard Thimbles are galvanized thimbles according to EN 13411-1 for making a 'hard' eye with wire rope, it creates a loop at wire rope ends. The thimbles provide a means for connecting wire rope to attachments. They are good for light duty rigging applications and ideally suited for

3/8" Wire Rope Sling with Closed Swage Socket, long-term durability Wire Rope Sling and Wire Rope End Fittings Product Description Swage sockets are used with a swaging machine to terminate wire ropes. This type of socket is more resistant to wire fatigue at the point of connection between the socket and cable, but it does not always have as much break strength efficiency as a spelter socket. The swage socket is attached to the end of a wire rope sling by using a hydraulic

1" Wire Rope Sling with Open Swage Socket (with cotter pin), long-term durability Wire Rope Sling and Wire Rope End Fittings Product Description A swage socket is attached to the end of a wire rope sling by using a hydraulic machine and special dies. Our open design swage socket features a spring pin that can attach wire rope sling to another type of fitting. The socket is forged from high tensile steel, while galvanization ensures its long-term durability. They are available

70mm Wire Rope Sling with Short Bow Socket, Closed Spelter Socket Sling, long-term durability Wire Rope Sling and Wire Rope End Fittings Product Description Short Bow Socket is a closed spelter socket. The socket is made from high tensile, quenched and tempered cast steel, with a different chemical composition and with extremely high mechanical properties, while galvanization ensures its long-term durability. Our Short Bow Socket meets RR-S-550D (type B) requirements and is

300mm Cable Laid Grommet, high capacity, large diameter, multi-wire strands sling, for Heavy Duty Application Grommet / Endless Cable Laid Wire Rope Sling, steel core Product Description Our high capacity Cable Laid Grommets are suitable for heavy duty operations. They are endless wire rope lifting slings made from one continuous length of steel wire rope, formed to make a body composed of 6 outer ropes around a core rope, featuring 6 x 37 (a), 6 x 61 (a), 8 x 61 (a) and 8 x