eye and eye lifting webbing sling
"
Het monteren van Bijkomend 2 de Kabelvingerhoedje van de Duim FF-t-276B Draad
2" Heavy Duty Thimble for Wire Rope, rigging accessory, greater protection against wear and deformation of the wire rope eye Wire Rope attachment Description Our Heavy Duty Thimble is designed for use with high-performance wire rope. The thimble creates a 'hard' eye at wire rope ends, making it features greater protection against wear and deformation of the wire rope eye. Our thimbles meet the performance requirements of Federal Specification FF-T-276B Type III. The
21/4 de Kabelvingerhoedje van de“ Vloeistaal Op zwaar werk berekend Draad
2-1/4" Heavy Duty Thimble for Wire Rope, rigging accessory, greater protection against wear and deformation of the wire rope eye Wire Rope attachment Description Our galvanized Heavy Duty Thimble provide smooth and even grooves, maximum strength in critical areas, and the proper bending radius for the rope. They are designed for use with high-performance wire rope. All of our thimbles meet the performance requirements of Federal Specification FF-T-276B Type III. The thimble
FF-t-276B Vingerhoedje van de de Draadkabel van het 3,5 Duim het Op zwaar werk berekende Vingerhoedje
3-1/2" Heavy Duty Thimble for Wire Rope, rigging accessory, greater protection against wear and deformation of the wire rope eye Wire Rope attachment Product Description Our galvanized Heavy Duty Thimbles meet the performance requirements of Federal Specification FF-T-276B Type III. They are designed for use with high-performance wire rope, sized from 1/8" to 3-1/2". The thimble creates a 'hard' eye at wire rope ends, making it features greater protection against wear and
EN 573-3 Aluminium adereindhulzen Eindstop Type T / TKH
TALURIT® Round Aluminium End Stopsmade of Aluminium alloynot used for lifting Version:0.9 StartHTML:0000000105 EndHTML:0000006747 StartFragment:0000000141 EndFragment:0000006707 GENERAL DESCRIPTION The aluminium ferrules, type T and type TKH correspond to the European standard for turnback ferrules (also known as ferrule secured eye terminations, FSET). The standard is EN 13411-3. The ferrule system is specifi ed in Appendix 1. Theferrules are extruded seamlessly over mandrel
ENGELS 573-3 het Beëindigeneinde van de Draadkabel
TALURIT® T / TS Aluminium Turnback Ferrule Product Description The ORIGINAL in mechanical splicing! The T aluminium turnback ferrule system is easy and reliable to use. It is quick, safe and has proved itself to be totally reliable. It is far more efficient than all other swaging methods on the market. Art. No: T 01 – T 152 The TALURIT T-ferrule is the original in mechanical splicing and has laid the grounds for the European standard. Nowadays, the T-ferrule correspond to the
UM aluminiummetalen kap
TALURIT® aluminium ferrule UM (Ultragrip™) smaller in diameter after pressing than TALURIT® T ferrule Product Description The UM ferrule become smaller in diameter after pressing than the T ferrule. For economic reasons, the UM ferrule can be used as an alternative to the T ferrule at wire rope grades, up to and including 1960. The UM ferrule are available from stock in sizes from 09-90. Art. No: UM 09 – UM 90 The aluminium ferrule UM (Ultragrip™) are made from a special
32mm Palband onderaan Riemen voor Beveiligende/Geselende en Vastmakende Ladingen
Used for securing/lashing and fastening loads. - All our ratchets conform to EN 12195-2:2000 requirements. - Lightweight, quick release mechanism for easy use - Produced from 100% polyester material, ratchet handles are made of alloy steel. - Width available in 25mm, 35mm, 50mm, 75mm or customized - Length available in 6m, 8m, 10m, 12m or customized - Safety Factor: 2:1 - Quick release mechanism for easy use. Product Description Our Solid Thimbles are used to protect the eyes
De op zwaar werk berekende Zelf Intrekkende Pal bindt 11000 kg-Ladingsgesp vast
Eye Sling Hook - Made by Forged Alloy Steel or Carbon Steel. - Galvanized, Quenched and Tempered. - Surface painted yellow. - Comply with ASME B30.10-2014 requirements Specification Cargo hooks are durable and features a wider throat than the clevis grab hooks. Forged, heat treated and coated with a zinc plated finish, this high quality slip hook can survive even the toughest conditions. These hooks are built to last and attach easily to our transport webbing and chain. They
Het op zwaar werk berekende Staal rukt Geplateerd Blokzink weg eindigt met Haak
Snatch Block With Hook Allow The Operator To Use Their Full Weight As A Pulling Force. The heavy duty steel blocks are use to make lifting easier by redirecting a force. Specification Cargo hooks are durable and features a wider throat than the clevis grab hooks. Forged, heat treated and coated with a zinc plated finish, this high quality slip hook can survive even the toughest conditions. These hooks are built to last and attach easily to our transport webbing and chain.
